| |
Spa Controls
We can rejuvenate any spa, anywhere.
|
|
|
|
Save big on operating costs!
|
|
|
|
|
Digital Hot Tub Controls For Any Spa
|
|
Row
|
USC, as low as $324.95, can operate circulating pump,
up to 4 jet pumps, a blower, and multicolor lights
|
|
|
|
USC, Digital Spa Control with remote spa heater,
low flow heater, can operate circulating pump,
up to 4 jet pumps, a blower, 12V light and 2 heaters.
|
|
This Series of spa controls is equipped with a remote heater. The remote spa heater is connected
with a 3 foot (91.44 cm) cable and can be installed anywhere inside the spa cabinet. This hot tub
control is diversified and can be equipped with 2 heaters ranging from 2500W (2.5kW) all the way
to 11000W (11kW). The USC can also operate up to 4 jet pumps, a circulating pump, an air blower
as well as spa lights with multiple LED lights. It is the perfect replacement for all low flow
spa heaters and for all spa brands. The USC can also be connected to a low flow water pump or
a high flow jet pump. It is the prefect replacement to all spas made by Hot Spring Spas,
Sundance Spas, Caldera Spas, Tiger River Spas, Watkins Spas, Dimension One Spas, and all others.
|
Dimensions: L=14½" x H=12⅛" x D=4½"
(Heater Manifold Length: Flange-to-Flange=15")
|
|
|
|
|
|
|
Megatrol Rainproof, for outdoor use, for spas, swimspas,
and pool equipment, most energy efficient spa control
heater sizes from 2.5kW up to 11kW
|
Dimensions: L=13¾" x H=13¼" x W=4¼"
|
The Megatrol spa equipment pack is designed with a rain tight enclosure. It can operate a portable spa,
inground hot tub, swimspa, above ground pool as well as swimming pools. The computer can be up to 100 feet (30.48 meters)
from the spa controller. The Megatrol can operate up to 4 jet pumps, a circulating pump, a blower, and multicolor spa lights.
The heater is low watt density and can be used in a low flow heater. A Wifi control can easily be installed on any of our
digital controls. The Automatic Air Bleeder can be adapted to protect the heater from dry-fire.
|
|
|
CSC, $324.95, operates single 2-speed pump,
add ons: circulating pumps, blower, 12V light
|
The Compact Spa Control (CSC) is a reliable spa control that fits all hot tubs and is a direct
replacement for all spa brands. The CSC spa pack is equipped with a 5500W (5.5kW), 4000W (4kW),
or 3000W (3kW) spa heater. The CSC control board can operate up to 4 water pumps. The Compact Spa Control
can power spas and hot tubs all over the world with 120V, 60Hz and 240V, 50Hz single or three phase power.
The CSC can replace all Balboa spa controls, Gecko hot tub controls, Spa Builder spa controls,
ACC spa packs, United Spas controls, Waterway digital controls and many others.
|
Dimensions: L=12.375" x H=12" x D=2¾"
(Heater Manifold Length: Flange-to-Flange=15")
|
|
|
|
|
|
|
Air Switching Spa Control
|
|
|
Why pay retail??? Buy manufacturer direct and save!!!!
We are the only spa control manufacturer to sell direct to the public at affordable prices.
All other hot tub control manufacturers have to sell through the
standard sales channel, from spa manufacturer, to dealer, to distributer,
to service people, and finally to the consumer at high cost.
Only with Acura Spa Systems, Inc., consumers can purchase brand new, reliable,
top quality hot tub controls, factory direct with free freight and no middle man.
We can properly manage your hot tub.
Our hot tub controls can power virtually any portable spa!
Simply verify dimensions for direct drop-in replacement in your spa.
We carry all materials in stock. Since 1987, we have powered over 1.3 million hot tubs of different names and brands.
We can also power yours.
Call us for any technical questions, 951-684-6667 x.223
Knowledge and experience you can trust.
Unlike other spa suppliers whose knowledge is just marketing talk,
our knowledge is powered by 16 Patents and 25 years of experience
in designing hot tubs and hot tub components.
Energy Efficiency:
Click to see the test performed at California Polytechnic University, San Luis Obispo for
compliance to Title 20 as required by the California Energy Commission (C.E.C.).
For safety:
All Acura Spa Systems controls and heaters have been tested and certified for public safety by ETL.
Our spa controls and packs are tested and certified for CE and IEC requirements for hot tubs and spas.
|
Our heater is 100% efficient!
Industry's Safest Electric Heater!
|
|
Click to see safety report as tested by ETL (page 6)...
Be certain your spa is safe if your GFI fails!
|
Free Freight* We Will Beat Any Competitor's Price!**
|
| |
Our spa controls have been tested to UL 1563 and UL 1081. |
NOTES:
All electrical work must be performed by a licensed electrician according to National Electrical Code
and all local codes and regulations.
All plumbing work must meet I.A.P.M.O., UL 1563, and all local codes and regulations
and must be performed by a licensed plumbing contractor.
All pump suction must be connected to two drains (VGB certified) in the spa to meet all safety requirements.
All shipments are F.O.B. Riverside, California.
*Free Freight only for Fedex SmartPost. Other forms of shipping incur additional shipping costs.
**Beating competitor's price: We will meet or beat any competitor's written quotation for hardware of the same capability, such as: plumbing size, voltage, motor horsepower, motor 1 or 2-speed, heater length, safety test report, etc.
A $9.95 Handling charge is applied to all orders.
All products sold per our "Terms and Conditions" found in the "Support" section of our menu.
When your order is produced, the pump motor used (A.O. Smith, Regal Beloit, Marathon Electric, etc.)
will be whatever is in stock in our factory at the time.
|
|
Digital or Pneumatic Controllers
Our spa side controls are Direct Replacements for all ACC Controls, Applied Computer Controls, SmartTouch Controls made for or sold by
Life Spas, LifeForce, United Spas, Sunbelt Spas, Phoenix Spas, American Spas, Waterways, Hot Tub Works, Spa Mechanics, EBay and others...
The HL2000, PM3002, MN2000, PM6000 and PM7000 are drop-in replacements, verify the shape and dimensions
to match your existing spa side control.
For all technical assistance regarding these spa controls,
call us at 951-684-6667 ext. 223.
Prices include Free Freight*
|
|
Throughout the years we have sold these spa side controls to many spa distributors
and spa manufacturers without a decal. They would supply their own decal on top of our spa side
control. The spa side control is the same, however the decal may be different.
When you purchase this spa side control direct from us we provide a decal. Your original decal
may not have the same color or the same number of buttons. Our decal exposes all the buttons of
the spa side control whether your original decal supported them or not. All controls functions
the same regardless of the decal.
It is just a decal and has no effect on the spa operation.
How To Replace Your Digital Spa Side Control Panel
- Turn the power OFF.
- Remove the spa access panels of your spa cabinet.
- Locate the digital spa controller.
- Unclip and remove the grey ribbon cable connecting the digital spa side control where it connects to the spa controller.
- The top side control is usually secured to the spa shell by either a dual-sided adhesive gasket or by silicone.
- Using a putty knife, carefully pry the old spa side control and adhesive or silicone away from the spa shell.
- Remove the old spa side control and the grey ribbon cable attached to it.
- Clean the opening on the spa shell to remove all the old silicone or any remnants of the gasket.
- Using the same adhesive method as your old spa side control, mount the new spa side control on the spa shell.
- Connect the grey ribbon cable attached to the new spa side control to the spa controller where the old cable was connected.
- Turn the power ON. Test all functions.
ACU2000 and ACU2010 Analog Topside Controls, PM3000 Digital Topside Controls, PM3002 Digital Topside Control,
PM5010 Digital Topside Control, HL2000 Digital Topside Control, MN2000 Digital Topside Control, PM6000 Digital Topside Control, PM7000 Digital Topside Control
*Free Freight only for Fedex SmartPost. Other forms of shipping incur additional shipping costs.
**Beating competitor's price: We will meet or beat any competitor's written quotation for hardware of the same capability, such as: plumbing size, voltage, motor horsepower, motor 1 or 2-speed, heater length, safety test report, etc.
A $9.95 Handling charge is applied to all orders.
All products sold per our "Terms and Conditions" found in the "Support" section of our menu.
When your order is produced, the pump motor used (A.O. Smith, Regal Beloit, Marathon Electric, etc.)
will be whatever is in stock in our factory at the time.
